Yale Lever/Ratchet Chain Hoists Yale Lever/Ratchet Chain Hoists Yale Lever/Ratchet Chain Hoists

Yale Lever/Ratchet Chain Hoists

Yale lever hoists have been replaced by CM.

View CM Lever Hoists!

Yale Lever Hoists

Yale Lever Hoists offer ruggedness and dependability in capacities ranging from 3/4 Ton to 6 Ton. Whether you need a portable hoist for tough spaces or a weatherproof hoist for the most difficult jobs, TSOC has a Yale ratchet hoist to meet your needs. All of the Yale Lever Hoists have been discontinued or replaced by CM Lever Hoists or Coffing Lever Hoists.

Yale PE2 & RS2 Lever Hoists

The Yale PE2 & RS2 Lever Hoists are designed to be used under the toughest conditions. Requiring very little effort to operate, the PE2 & RS2 are used in all types of industries: mining, petrochemical, ship building and construction to name a few. PE2 models were replaced by the CM 640 Lever Hoist. RS2 models were replaced by the CM Short Handle Puller.

  • Capacities ranging from 3/4 Ton to 6 Ton
  • Easy one-hand operation
  • Weatherproof for outdoor service
  • Hoist alloy hardened steel link type load chain for strength, flexibility and long wear life
  • Weatherized Weston-type automatic braking system for positive load control
  • Lifetime Warranty
  • Made in the U.S.A.
Yale PE2 Come Along Models
Part No. Cap.
(tons)
Replaced By
931-04108 3/4 CM 640 Puller
931-06108 1-1/2 CM 640 Puller
931-09108 3 CM 640 Puller
931-14108 6 CM 640 Puller
Yale RS2 Come Along Models
Part No. Cap.
(tons)
Replaced By
935-04101 3/4 CM 7300 Puller
935-06101 1-1/2 CM 7300 Puller
935-08101 3 CM 7300 Puller

Yale PD2 Lever Hoist

The Yale PD2 Ratchet Lever Hoist is built to be rugged and durable. The PD2 housings are built from high-strength malleable cast iron to protect the brake and gearing from mud, dirt and shock. The PD2 models were discontinued and replaced by the CM 653 Lever Hoist

  • Capacities ranging from 3/4 Ton to 6 Ton
  • Weston type load brake and single locking pawl type
  • One hand operation with an offset handle to protect the operator's hand from the chain
  • Electrically welded link chain for kink resistant flexibility
  • 360° swivel top and bottom hooks
Part No. Cap.
(tons)
Replaced By
931-04107 3/4 CM 653 Hoist
931-06107 1-1/2 CM 653 Hoist
931-09107 3 CM 653 Hoist
931-14107 6 CM 653 Hoist

Yale PM Ratchet Lever Hoist

The Yale PM Ratchet Lever Hoist is designed to perform in even the most cramped or awkward quarters. It is rugged, portable, only 12 inches long and requires only 37 pounds of handle pull to lift a capacity load. The PM models were replaced by the Coffing PA Lever Hoist

  • Capacities ranging from 3/4 Ton to 3 Ton
  • Minimum handle pull needed to lift capacity loads
  • Lightweight and rugged aluminum housing
  • Minimum 25° lever stroke for extremely precise load placement
  • One hand operation
Part No. Cap.
(tons)
Replaced By
829-04100 3/4 PA Lever Hoist
829-05100 1 PA Lever Hoist
829-06100 1-1/2 PA Lever Hoist
829-09100 3 PA Lever Hoist

TSOC distributes Yale Lever Hoists all over the United States and has reps covering Missouri, Illinois, Indiana, Kansas, Arkansas, Mississippi, Nebraska, Tennessee, Kentucky, Iowa, and Oklahoma.

Back to Top