SUSPA Movotec Hydraulic Height Adjustment Work Table Systems
The hydraulic Movotec adjustment system consists of hydraulic lift cylinders and a pump that is driven with a hand crank or an electric motor. The drive generated in this way drives the oil out of the pump into the cylinders or from the cylinders back into the pump causing the extension or retraction within the provided adjustment range (stroke).
Bolt-On System with Hand Crank – A readily available kit used to retrofit your existing non-adjustable work table to make it height-adjustable. Systems include:
- Hydraulic pump with hand crank.
- 4 - Bolt-on lift cylinders.
- Two 8 ft. and Two 10 ft. sections of flexible tubing.
- 4 glides.
- Drilling templates, tube clips and cable ties.
- Installation and operating instructions.
BOLT-ON HYDRAULIC SYSTEM WITH HAND CRANK |
Part Number |
Max. Load |
Adjustment Range |
Pump |
Cylinder (x4) |
MLS-00005 |
1000 lbs. / 454 kg |
5.9 in. / 150 mm |
Q4612 |
CB415 |
MLS-00006 |
1000 lbs. / 454 kg |
7.9 in. / 200 mm |
Q4615 |
CB420 |
MLS-00007 |
1000 lbs. / 454 kg |
11.8 in. / 300 mm |
Q4623 |
CB431 |
MLS-00008 |
1000 lbs. / 454 kg |
15.7 in. / 400 mm |
Q4631 |
CB440 |
MLS-00080 |
1300 lbs. / 590 kg |
5.9 in. / 150 mm |
Q4615 |
CB615 |
MLS-00081 |
1300 lbs. / 590 kg |
9.1 in. / 230 mm |
Q4623 |
CB631 |
MLS-00082 |
1300 lbs. / 590 kg |
11.8 in. / 300 mm |
Q4631 |
CB631 |
MLS-00083 |
1300 lbs. / 590 kg |
15.5 in. / 393 mm |
Q4639 |
CB640 |
Bolt-On System with Motor - A readily available kit used to retrofit your existing non-adjustable work table to make it height-adjustable. Systems include:
- Hydraulic pump with motor, controller, and switch.
- 4 - Bolt-on lift cylinders.
- Two 8 ft. and Two 10 ft. sections of flexible tubing.
- 4 glides.
- Drilling templates, tube clips and cable ties.
- Installation and operating instructions.
BOLT-ON HYDRAULIC SYSTEM WITH MOTOR |
Part Number |
Max. Load |
Adjustment Range |
Pump |
Cylinder (x4) |
MLS-00005E |
1000 lbs. / 454 kg |
5.9 in. / 150 mm |
Q4612 |
CB415 |
MLS-00006E |
1000 lbs. / 454 kg |
7.9 in. / 200 mm |
Q4615 |
CB420 |
MLS-00007E |
1000 lbs. / 454 kg |
11.8 in. / 300 mm |
Q4623 |
CB431 |
MLS-00008E |
1000 lbs. / 454 kg |
15.7 in. / 400 mm |
Q4631 |
CB440 |
MLS-00080E |
1300 lbs. / 590 kg |
5.9 in. / 150 mm |
Q4615 |
CB615 |
MLS-00081E |
1300 lbs. / 590 kg |
9.1 in. / 230 mm |
Q4623 |
CB631 |
MLS-00082E |
1300 lbs. / 590 kg |
11.8 in. / 300 mm |
Q4631 |
CB631 |
MLS-00083E |
1300 lbs. / 590 kg |
15.5 in. / 393 mm |
Q4639 |
CB640 |
Dual Drive Bolt-On System - A readily available kit used to retrofit your existing non-adjustable work table to make it height-adjustable. Systems include:
- Two synchronized motor-driven hydraulic pumps with controller and switch.
- 6 cylinder "Bolt-On" lift systems use one 2.5m (8 ft.) and two 3m (10 ft.) sections of flexible tubing per pump.
- 8 cylinder "Bolt-On" lift systems use two 2.5m (8 ft.) and two 3m (10 ft.) sections of flexible tubing per pump.
- Glides for each lift cylinder.
- Drilling templates, tube clips and cable ties.
- Installation and operating instructions.
DUAL DRIVE BOLT-ON HYDRAULIC SYSTEM |
Part Number |
Max. Load |
Adjustment Range |
Pump |
Cylinder (x4) |
MLS-00024 |
2000 lbs. / 907 kg |
5.9 in. / 150 mm |
Q4612 |
CB415 |
MLS-00025 |
2000 lbs. / 907 kg |
7.9 in. / 200 mm |
Q4615 |
CB420 |
MLS-00026 |
2000 lbs. / 907 kg |
11.8 in. / 300 mm |
Q4623 |
CB431 |
MLS-00027 |
2000 lbs. / 907 kg |
15.7 in. / 400 mm |
Q4631 |
CB440 |
MLS-00090 |
2500 lbs. / 1134 kg |
5.9 in. / 150 mm |
Q4615 |
CB615 |
MLS-00091 |
2500 lbs. / 1134 kg |
9.1 in. / 230 mm |
Q4623 |
CB631 |
MLS-00092 |
2500 lbs. / 1134 kg |
11.8 in. / 300 mm |
Q4631 |
CB631 |
MLS-00093 |
2500 lbs. / 1134 kg |
15.5 in. / 393 mm |
Q4639 |
CB640 |
Corner Leg System with Hand Crank - This system is delivered with ready-to-install corner legs on conventional aluminum profiles. An individual height-adjustable table base can be assembled onto the ready-to-install corner legs. Systems include:
- Hydraulic pump with hand crank.
- 4 Corner leg lift cylinders.
- Two 8 ft. and Two 10 ft. sections of flexible tubing.
- 4 glides.
- Drilling templates, tube clips and cable ties.
- Installation and operating instructions.
CORNER LEG HYDRAULIC SYSTEM WITH HAND CRANK |
Part Number |
Max. Load |
Adjustment Range |
Pump |
Cylinder (x4) |
MLS-00040 |
750 lbs. / 340 kg |
5.9 in. / 150 mm |
Q4809 |
CB450(150) |
MLS-00041 |
750 lbs. / 340 kg |
7.9 in. / 200 mm |
Q4812 |
CB450(200) |
MLS-00042 |
750 lbs. / 340 kg |
11.8 in. / 300 mm |
Q4818 |
CB450(300) |
MLS-00043 |
750 lbs. / 340 kg |
15.7 in. / 400 mm |
Q4824 |
CB450(400) |
Corner Leg System with Motor - This system is delivered with ready-to-install corner legs on conventional aluminum profiles. An individual height-adjustable table based can be assembled on the ready-to-install corner legs. Systems include:
- Hydraulic pump with motor, controller, and switch.
- 4 Corner leg lift cylinders.
- Two 8 ft. and Two 10 ft. sections of flexible tubing.
- 4 glides.
- Drilling templates, tube clips and cable ties.
- Installation and operating instructions.
CORNER LEG HYDRAULIC SYSTEM WITH MOTOR |
Part Number |
Max. Load |
Adjustment Range |
Pump |
Cylinder (x4) |
MLS-00044 |
750 lbs. / 340 kg |
5.9 in. / 150 mm |
Q4809 |
CB450(150) |
MLS-00045 |
750 lbs. / 340 kg |
7.9 in. / 200 mm |
Q4812 |
CB450(200) |
MLS-00046 |
750 lbs. / 340 kg |
11.8 in. / 300 mm |
Q4818 |
CB450(300) |
MLS-00047 |
750 lbs. / 340 kg |
15.7 in. / 400 mm |
Q4824 |
CB450(400) |
Aluminum Table Underframe (ATU) Lift System - You can assemble your custom height-adjustable 2-leg table with the ATU table system. All required frame and accessories parts can be ordered for this purpose, except for the tabletop. Systems include:
- A crank or motor driven hydraulic pump.
- 2 lift cylinders with ATU bracket.
- 2 Aluminum Table Underframes (ATU).
- 2 flexible tubing sections 3 ft. and 6 ft.
ALUMINUM TABLE UNDERFRAME (ATU) HYDRAULIC LIFT SYSTEM |
Part Number |
ATU System Type |
Adj. Range |
ATU Retracted Lgth. |
Pump |
Cylinder (x4) |
MLS-00060 |
Hand Crank |
7.9 in. / 200 mm |
19.7 in. / 500 mm |
Q2818 |
CE420 |
MLS-00061 |
Hand Crank |
11.8 in. / 300 mm |
23.6 in. / 600 mm |
Q2818 |
CE430 |
MLS-00062 |
Electric Motor |
7.9 in. / 200 mm |
19.7 in. / 500 mm |
Q2812 |
CE420 |
MLS-00063 |
Electric Motor |
11.8 in. / 300 mm |
23.6 in. / 600 mm |
Q2818 |
CE430 |
SUSPA Lift Table Accessories
Many accessory options are available with SUSPA at a much lower cost than the competition, including a programmable digital display switch that can be retrofitted in the field and do not require factory synchronization, 20 inch stroke 4-post systems and Corner Leg Systems compatible with any aluminum profile extrusions with T-slots.
SUSPA offers a low-cost digital display, 4-preset programmable switch. This programmable switch can be added to any electric SUSPA system in place of the standard low profile toggle switch (copied above) for just minimal cost adder to the system when purchased or this SUSPA digital display switch can be purchased as an add-on accessory. Unlike the competitors programmable switch, the SUSPA programmable switch does not add hundreds in cost and does not have to be programmed at the factory like other programmable switches do. The SUSPA programmable switch just plugs into the back of the pump and offers 4 programmable settings with a digital display that shows you exactly what height you are using.
SUSPA offers 20-inch stroke 4-post systems for hundreds less than the competition. A 4-cylinder, manual and electric 20-inch stroke SUSPA systems with 1,000-pound capacity are available. The SUSPA 20-inch stroke systems come with the same folding handle as the other manual 4-cylinder systems come with.
SUSPA Offers their Corner Leg Systems compatible with any aluminum profile extrusions with T-slots. This Corner Leg system is SUSPA's Internal Cylinder mount system which houses the leg cylinder inside their aluminum profile, and you can join it to any aluminum profile structure with T-Slots.
Movotec SMS Electric Retrofit Table Lift System
The Movotec SMS (Spindle Motor System) is a fully electric and mechanical (electromechanical) lift system for heavy loads with lift capacities up to 2,000 pounds. The SMS systems are used to create an adjustable height workstation or workplaces that are used when sitting or standing. These systems are a component of partly completed machinery. The lifting elements are designed for compressive loads; intended to be incorporated into other machinery or other partly completed machinery, equipment and integrated with a separate support framework to form a complete height adjustable work machine, lift table or height adjustable workstation. The lifting system components are driven by electric motors and synchronized by a controller. The system works purely electromechanically and without the use of hydraulics. Choose between three systems:
Movotec SMS Bolt-On Retrofit
Simply upgrade your existing workplace machines, workstations, assembly systems or workbenches by installing the kits electrical controller, electric lifting elements (actuators), and push button switch. Features include:
MOVOTEC SMS BOLT-ON SYSTEM SPECIFICATIONS |
Installation Descriptions |
Installation Dimensions |
Dimension of external profile / pipe |
CB profile 1.37 in. / 35 mm |
External tube material |
Aluminum, silver anodized |
Internal tube dimensions |
∅ .98 in. / 25 mm |
Internal tube material |
Aluminum, anodized |
Motor housing dimensions |
Motor integrated into profile |
Part number |
00410211 |
00410212 |
00410213 |
00410214 |
Stroke (Lstroke) |
5.9 in. / 150 mm |
7.9 in. / 200 mm |
11.8 in. / 300 mm |
15.7 in. / 400 mm |
Retracted length (Lin) |
19.1 in. / 485 mm |
21.1 in / 535 mm |
25 in. / 635 mm |
28.9 in. / 735 mm |
Extended length (Lout) |
25 in. / 635 mm |
28.9 in. / 735 mm |
36.8 in. / 935 mm |
44.7 in. / 1,135 mm |
Fastening structure |
4 x M5 (screw-in depth max. 7 mm) |
Fastening on foot stabilizer |
1 x M10 (internal thread) |
Performance Descriptions |
Performance Data |
Max. extension force per actuator |
330 lbs. / 150 kg |
165 lbs. / 75 kg |
Max. extension force with 4-leg system |
1,322 lbs. / 600 kg |
661 lbs. / 300 kg |
Max. extension force with 8-leg system |
2,645 lbs. / 1,200 kg |
1,322 lbs. / 600 kg |
Travel speed |
~ 8 mm/s |
~ 16 mm/s |
Functional operating range |
+41° F to +104° F / +5° C to +40° C |
Protection class |
IP 40 |
Call (314) 869-7200 or Email for pricing. |
Movotec SMS Assembly Profile for Work Systems.
This very compact solution already integrates the electrical lifting actuators into the aluminum extrusion leg profiles. With the standard dimension of 40x80 mm or 45x90 mm, the systems are compatible with many commonly sold aluminum extrusion profiles and fastening systems such as angle brackets or direct connectors. Choose between two systems. Features include:
MOVOTEC SMS-I-40x80 SYSTEM SPECIFICATIONS |
Installation Descriptions |
Installation Dimensions |
Dimension of external profile / pipe |
Installation profile 1.57 in. x 3.15 in. / 40 x 80 mm |
External tube material |
Aluminum, silver anodized |
Internal tube dimensions |
∅ 0.98 in. / 25 mm |
Internal tube material |
Aluminum, anodized |
Motor housing dimensions |
Motor integrated into profile |
Part Number |
00410268 |
00410269 |
00410270 |
00410271 |
Stroke (Lstroke) |
5.9 in. / 150 mm |
7.9 in. / 200 mm |
11.8 in. / 300 mm |
15.7 in. / 400 mm |
Retracted length (Lin) |
20.1 in. / 510 mm |
22 in. / 560 mm |
25.9 in. / 660 mm |
29.9 in. / 760 mm |
Extended length (Lout) |
25.9 in. / 660 mm |
29.9 in. / 760 mm |
37.8 in. / 960 mm |
45.7 in. / 1,160 mm |
Fastening structure |
4 grooves 8 mm wide |
Fastening on foot stabilizer |
1 x M10 (internal thread) |
Performance Descriptions |
Performance Data |
Max. extension force per actuator |
330 lbs. / 150 kg |
165 lbs. / 75 kg |
Max. extension force with 4-leg system |
1,322 lbs. / 600 kg |
661 lbs. / 300 kg |
Max. extension force with 8-leg system |
2,645 lbs. / 1,200 kg |
1,322 lbs. / 600 kg |
Travel speed |
~ 8 mm/s |
~ 16 mm/s |
Functional operating range |
+41° F to +104° F / +5°C to +40° C |
Protection class |
IP 40 |
Call (314) 869-7200 or Email for pricing. |
MOVOTEC SMS-B-45X90 SYSTEM SPECIFICATIONS |
Installation Descriptions |
Installation Dimensions |
Dimension of external profile / pipe |
Installation profile 1.77 in. x 3.54 in. / 45 x 90 mm |
External tube material |
Aluminum, silver anodized |
Internal tube dimensions |
∅ 0.98 in. / 25 mm |
Internal tube material |
Aluminum, anodized |
Motor housing dimensions |
Motor integrated into profile |
Part number |
00410272 |
00410273 |
00410274 |
00410275 |
Stroke (Lstroke) |
5.9 in. / 150 mm |
7.9 in. / 200 mm |
11.8 in. / 300 mm |
15.7 in. / 400 mm |
Retracted length (Lin) |
20.1 in. / 510 mm |
22 in. / 560 mm |
25.9 in. / 660 mm |
29.9 in. / 760 mm |
Extended length (Lout) |
25.9 in. / 660 mm |
29.9 in. / 760 mm |
37.8 in. / 960 mm |
45.7 in. / 1,160 mm |
Fastening structure |
4 grooves 10 mm wide |
Fastening on foot stabilizer |
1 x M10 (internal thread) |
Performance Descriptions |
Performance Data |
Max. extension force per actuator |
330 lbs. / 150 kg |
165 lbs. / 75 kg |
Max. extension force with 4-leg system |
1,322 lbs. / 600 kg |
661 lbs. / 300 kg |
Max. extension force with 8-leg system |
2,645 lbs. / 1,200 kg |
1,322 lbs. / 600 kg |
Travel speed |
~ 8 mm/s |
~ 16 mm/s |
Functional operating range |
+41° F to +104° F / +5° C to +40° C |
Protection class |
IP 40 |
Call (314) 869-7200 or Email for pricing. |